Now don't you just hate it when your zipper pull breaks or cracks off, especially when you're in a hurry? It is annoying don't you think so? Well of course you always replace the whole zipper itself. Certainly it may not necessary be easy as it may need a little bit a skill but with practice, it is not as hard as it appears to be.
The first thing you have to do is to determine the kind of zipper pull that you need to repair or change then get them at the nearby store which sells jewelry-making supplies.
Other items that you will require include - a needle nose pliers, 1 inch split ring, jewellery charm and also a jump ring.
Below are a few steps on how it is possible to repair or restore the zipper:
Step 1) The first thing is to get rid of the damaged or aged zipper pull pieces. If needed, use a needle-nose pliers to get rid of the components.
Step 2) Then next thing, try separating the split ring and fasten it to the hook in the slider. The slider will be the piece which slides up and down, along the teeth of the zipper. And then here comes the difficult part, turn the split ring till it is on the zipper loop.
Step 3) Utilize the needle nose pliers and open up the jump ring (with jewellery charm hanging it) slightly, after that place the jump ring into the split ring.
Step 4) The moment the jump ring is in the split ring, utilize the needle nose pliers and close up the jump ring. Use the tip of your thumb and also index finger and squeeze both sides of the jump ring, be sure the jewelry charm is secured and stay connected to the ring.
Step 5) Finally, you may try out the zipper by pulling the zipper up and down.
If you want to find out more about zipper pulls, simply stop by the web page posted below for more cool facts.
The first thing you have to do is to determine the kind of zipper pull that you need to repair or change then get them at the nearby store which sells jewelry-making supplies.
Other items that you will require include - a needle nose pliers, 1 inch split ring, jewellery charm and also a jump ring.
Below are a few steps on how it is possible to repair or restore the zipper:
Step 1) The first thing is to get rid of the damaged or aged zipper pull pieces. If needed, use a needle-nose pliers to get rid of the components.
Step 2) Then next thing, try separating the split ring and fasten it to the hook in the slider. The slider will be the piece which slides up and down, along the teeth of the zipper. And then here comes the difficult part, turn the split ring till it is on the zipper loop.
Step 3) Utilize the needle nose pliers and open up the jump ring (with jewellery charm hanging it) slightly, after that place the jump ring into the split ring.
Step 4) The moment the jump ring is in the split ring, utilize the needle nose pliers and close up the jump ring. Use the tip of your thumb and also index finger and squeeze both sides of the jump ring, be sure the jewelry charm is secured and stay connected to the ring.
Step 5) Finally, you may try out the zipper by pulling the zipper up and down.
If you want to find out more about zipper pulls, simply stop by the web page posted below for more cool facts.
About the Author:
Zoey Kurgen is an expert author and also writes for ZipperPulls.org and similar websites.